Home Assistant Connect AUX-2: $69 box adds PoE, serial and audio to old gear
Nabu Casa launches the Home Assistant Connect AUX-2 for $69 / €59, a PoE-powered box with audio streaming, two serial ports and a Bluetooth hub for older devices.
Nabu Casa has launched the Home Assistant Connect AUX-2, a small box priced at $69 / €59 that is available worldwide today. According to the company, it can stream audio, control RS-232 serial devices and host a Z-Wave adapter, while also working as a Bluetooth hub — with Power over Ethernet (PoE) included after user demand, plus USB power and Wi-Fi as alternatives.
The pitch is simple: keep the hardware you already own. Nabu Casa says the audio streaming can turn a forgotten hi-fi into something that plays in sync with modern smart speakers, while serial control can bring older solar or climate equipment into your automations.
It is not only about old devices. The company suggests using the box to keep a TV off the internet and control it locally instead, or to place a Connect ZWA-2 in a better spot while powering it over PoE.
What the ports do
According to Shay, Product Manager at Nabu Casa, the project began as a compact box to run a Connect ZWA-2 or ZBT-2 over PoE. Because PoE accounted for most of the hardware cost, adding extra ports turned out to be relatively cheap, and the design grew from there.
The result includes two serial ports, a combo analog/digital audio jack, a USB port, a Grove connector and an upgraded Bluetooth antenna. The name reflects that: AUX stands for Audio, USB and X for serial.
On the audio side, Nabu Casa says the optical input carries lossless CD-quality sound, while serial lets you control volume, source and power, even from standby. The built-in digital-to-analog converter is described as a step up from the one in the Voice Preview Edition, and the device detects whether a cable is analog or digital and switches output automatically. The company also says the box never draws more than a watt or two.
For serial, Nabu Casa chose RS-232 as the most common connector on the devices it tested, and says RS-485 devices can be reached through the USB port with a $15 adapter for Modbus. The 3.5 mm serial ports ship with a sticker over them so they are not mistaken for audio jacks, and switches on the bottom let you use cables that swap RX and TX.
Music Assistant ties it together
Nabu Casa credits Music Assistant, which supports streaming services and local files in one library, for making the audio side practical. Its Sendspin protocol, according to the company, lets you group several AUX-2 units for synced playback or pair them with a HomePod, Sonos speaker and more.
The Connect AUX-2 is available now for $69 / €59. You will need a Home Assistant setup to use it, and serial devices may require enabling serial control in their own settings first.
Related reading
Sources
- No device left behind: Home Assistant Connect AUX-2 — Home Assistant
Some links on this page may be affiliate links. If you buy through them we may earn a commission at no extra cost to you. See our affiliate disclosure.